Can't get Vibe Streamer to work with router

Just got a router and can’t get Vibe Streamer to work with it
I set port forwarding to what I think is right?
Settings IP address 67.168.126.74 Port 8081
Server won’t start
Error message
Webserver could not be started (could not bind socket to 67.168.126.74 port (8081))


I set IP Address to (all unassigned) then server starts but I can’t access it (local) -- http//67.168.126.748081/

The IP that just fetched this page is
67.168.126.74

Service Name Service Type Start Port End Port Server IP Address
Vibe Streamer TCP/UDP 8081 8081 67.168.126.74


Internet port
IP Address 67.168.126.74(Via DHCP)
IP Subnet Mask 255.255.254.0(Via DHCP)
Default Gateway 67.168.126.1(Via DHCP)
DNS Server Address Primary 68.87.69.146(Via DHCP)
DNS Server Address Secondary 68.87.85.98(Via DHCP)
Host Name AP001601A1911E (Manual)
Domain Name hsd1.wa.comcast.net.(Via DHCP) MTU Size 1500 DHCP Server Address 68.87.69.10
MAC Address 001601A1911E

LAN Port
IP Address 192.168.11.1
IP Subnet Mask 255.255.255.0
MAC Address 001601A1911E

Wireless Port NOT USING WIRELESS
Wireless Status ON SSID 001601A1911E Authentication Open Encryption Open Broadcast SSID Enabled Wireless Channel Auto PinCode 17133029 MAC Address 001601A1911E

Assuming you have VibeStreamer set up on the internal network of the router you have to forward your router to the internal address, not the external.
Forward port 8081 to 192.168.11.1.

Internally (local) you would check it at http//localhost8081/, but you cannot check if it can be reached externally from inside... unless you use a proxy.

didn't work
vibe streamer wouldn't connect

any other ideas?
what am I doing wrong?

Change your ip to 10.0.0.1 or 2,3,4 etc etc depending who is on network. IF your only one it will be 1 or 2. (10.0.0.2)

Then it should work

remember if you go 10.0.0.138 it should give you access to router so you can do it in napt settings part and make sure thats also 10.0.0.1 etc etc.

hope it helps

Change your ip to 10.0.0.1 or 2,3,4 etc etc depending who is on network. IF your only one it will be 1 or 2. (10.0.0.2)

hope it helps[/quote2x1kvqyp]

starting to understand what I'm doing a little bit
thought about trying 2 instead of 1
then saw your post
it works

thanks